Mohawk Alien Coils 100% Stainless steel vape coils.
A tight alien wrap for better capiliary action. Coils with loose wrapping are more likely to give a dry hit.
Mohawk Alien Coils
- Core : 3 by 0.30 mm (29 AWG)
- Wrap: 1 by 0.12 mm
- 2.5 mm coil inner diameter gives approx 0.35 – 0.4 Ω at 4/5 wraps.
- Optimal range 25W to 100W per coil.
- At 4.2 Volts : 0.36 Ω = 50W : 12 AMPS
Suggested for use in a regulated high wattage mod 25 – 100W.
All these vape coils are individually handmade exotic coils and not mass produced. They are all made by me from stainless steel as to give the cleanest flavour from your juice with the best ramp up time. Although there is no reason to believe that other metals , such as nickel kanthal or titanium are harmful in the vaping environment, stainless steel is by far the safest bet, and essential for anyone with nickel allergy. Stainless steel can last longer and gives a crisper flavour .
The Mohawk alien coils should be treated with great care when installing and combed very gently as they have a very delicate structure so please be careful not to pack the cotton too tightly.
These handmade coils are for the experienced advanced vapor and not for the novice or beginner.
- As a safety guideline for Mechanical or Hybrid mods, use high drain batteries capable of 25 AMP continuous load, one battery per coil, or batteries of 50 AMP load on dual coil.
- Make sure that your batteries are not damaged ( wrapping, contacts or insulator ring )
- Ensure drippers and tanks have a positive pin at least 1.5mm proud and not spring loaded.
- Please also research, and purchase your choice of E-liquid from a reputable source!
- Your safety is paramount.
- Small parts that may cause a choking hazard and dangerous if swallowed so please keep out of the reach of children and animals.