Nano Alien coils for the best mouth to lung flavour experience at low wattage.
These coils are very tiny with a 2.0 mm Inside diameter
Nano Alien Coils 3 core
- If you are not a cloud chaser and just want to replace that standard wrap rebuild coil with the benefits of an alien, then these are a perfect start.
- These aliens will fit into any deck that is capable of mounting 24 gauge wire.
- Better flavour and vapour production at lower wattage than a standard clapton coil.
- The Nano aliens are very tiny full 3 core alien coils, built for the smaller tanks.They fit well in tanks like the Kayfun or KangerTec Sub Tank and Mini, where the space is limited.
- They let you experience the improved performance and flavour of the alien build in a space intended only for plain wire build.
- These are made with 3 cores of 0.2 mm stainless steel with a 0.06 mm alien Clapton.
- Each coil is between 0.35Ω and 0.5Ω depending on deck and positioning.
- I always leave long legs to assist in alteration for deck fitting.
- 3.0 x 0.2mm (32 AWG) cores
- Shell: 0.06mm (42 AWG) alien wrap
- 2.0mm coil inner diameter gives approx 0.35- 0.5 Ω at 5/6 wraps
- Optimal range 10W to 40W per coil
- At 4.2 Volts : 0.4 Ω = 44W : 10 AMPS
Suggest pairing for 40W and above as their size limits power handling.
All these vape coils are individually handmade exotic coils and not mass produced. They are all made by me from stainless steel to give the cleanest flavour from your juice and the best ramp up time. Although there is no reason to believe that other metals , such as nickel kanthal or titanium are harmful in the vaping environment, stainless steel is the safest bet, especially for anyone with nickel allergy. Stainless steel can last longer and gives a cleaner crisper flavour and better ramp up time.
These Nano Alien coils are for the experienced advanced vapor and not for the novice or beginner.
Recommended to install and dry burn one coil at a time. This will help to prevent overloading your mod.
- As a safety guideline for Mechanical or Hybrid mods, use high drain batteries capable of 25 AMP continuous load, one battery per coil, or batteries of 50 AMP load on dual coil.
- Make sure batteries are not damaged ( wrapping, contacts or insulator ring )
- ensure drippers and tanks have a positive pin at least 1.5mm proud and not spring loaded.
Please also research, and purchase your choice of E-liquid from a reputable source!
- Please research, as your safety is paramount.
- Small parts that may cause a choking hazard and dangerous if swallowed. Keep out of the reach of children and animals.